5v Relay Module Single Channel (Without Optocoupler) - ADIY

ADIY 1 channel 5v relay module is designed for switching only a single high powered device from your Arduino. It has a relay rated up to 10A per channel at 250VAC or 30VDC. There are two LEDs on the relay module indicating the position of the relay. We have three channels of the relay broken out to screw pin terminals. The channels are labeled for their function: common (COM), normally closed (NC), and normally open (NO). On the other side of the module, there are three pins – a Ground pin and a VCC pin to power the module and an input pin IN to control the relay. The input pin is active low, meaning the relay will be activated when you pull the pin LOW and it will become inactive when you pull the pin HIGH.

ADIY 1-channel 5V control Single-Pole Double-Throw (SPDT) High-level trigger AC power relay board can be controlled directly via a microcontroller and switch up to 10A at 250 VAC. The inputs of 1 Channel 5V Relay Module are isolated to protect any delicate control circuitry.The default state of the relay when the power is off for COM (Power) to be connected to NC (Normally Closed). This is the equivalent of setting the relay board IN pin to HIGH (has +5V sent to it). A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, etc can be used to control this 5V relay module  

5v Relay Module Single Channel - ADIY :  Specifications

  • Supply voltage – 3.75V to 6V
  • Quiescent current: 2mA
  • Current when the relay is active: ~70mA
  • Relay maximum contact voltage – 250VAC or 30VDC
  • Relay maximum current – 10A
  • Trigger Voltage: 5 VDC
  • Trigger Current : 20 mA
  • Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
  • Single Pole Double Throw (SPDT) Configuration
  • Power supply indicator lamp

5v Relay Module Single Channel - ADIY : Applications

  • Mains switching
  • High current switching
  • Isolated power delivery
  • Home automation

5v Relay Module Single Channel - ADIY : Features

  • 1 channel relay module.
  • One normally closed contact and one normally open contact.
  • High impedance controller pin.
  • Default High-level trigger.
  • Pull-down circuit for the avoidance of malfunction.
  • Power supply indicator lamp.
  • Can be controlled various appliances & other Equipment With Large current.
  • Standard TTL Level logic controlled.
  • The module is compliant with international safety standards.
  • With 4 fixed screw holes, hole diameter 3.1mm, convenient installation, and fixation.
Useful Link: 5v Relay Module Single Channel - ADIY
Alternate Relay Modules to 5v Relay Module Single Channel - ADIY
Package Include : 5v Relay Module Single Channel - ADIY
1 x 5V 1 Channel Relay Module