The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WIFI based IoT applications thanks to the flexibility of ESP32 module and it’s low power consumption.
The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.
This thin board has been designed to offer a practical and cost-effective solution for makers to design IoT projects with minimal previous experience in networking. It is based on the low power Arm® Cortex®-M0 32-bit SAMD21, which is part of the Arduino MKR family. Wireless devices specifically designed for the Internet of Things (IoT).The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. On top of those, secure communication is ensured through the Microchip® ECC508 crypto chip. Besides that, you can find a battery charger, and a directionable RGB LED on-board.
Discription : Arduino MKR WIFI 1010 Board
- The MKR WIFI 1010 includes 32- bit computational power, the usual rich set of I/O interfaces, and low power Wi-Fi with Cryptochip for secure communication using SHA-256 encryption.
- It offers ease of use Arduino Software (IDE) for the emerging IoT battery-powered projects in a compact form.
- It’s USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WiFi 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Model Name/Number | mkr1010 |
| Digital I/O Pin | 8 Pins |
| Microcontroller | SAMD21 Cortex- M0+32 bit low power ARM MCU |
| Radio Module | U- Blox NINA-W 102 |
| Board power supply (USB/VIN) | 5V |
| Secure element | ATECCC508 |
| Supported battery | Li-Po single cell,3.7V,1024 mAh minimum |
| Circuit operating voltage | 3.3 V |
| Analog input pins | 7 (ADC 8/10/12 bit) |
| Analog output pins | 1 (DAC 10 bit) |
| External interrupts | 8 (0,1,4,5,6,7,8,16/A1,17/A2) |
| DC current per I/O pin | 7 mA |
| CPU flash memory | 256 KB (internal) |
| SRAM | 32 Kb |
| Clock speed | 32.768 kHz (RTC),48 MHz |
| Weight | 32 gm |
| Size | 61.5mm x 25mm |