SEN-HZ43WB 3/4" Brass Water Flow Sensor


  • Water quality requirements Drinking water health standards,0~100oC.
  • Flow Range3.5~20L/min, starting flow rate can be fine adjustable.
  • Withstand hydraulic pressure1.2MPa.
  • Voltage/Electric Current Below DC100V/AC110V,1A.
  • Switching Power 10W, High voltage normally open,(NO).
  • Insulation Resistor108, Switching life108 times.
  • Switching Response time0.35ms, release time30s.
  • Installation method : Horizontal direction.
  • Apply to air energy hot pump, solar hot water heater, starting mode of pump, mechanical equipment, instrument meter etc.

 


Price :  excl. GST
Qty Price
1 > 343.00
6 > 332.00
21 > 308.00
50 > 301.00
100 > 296.00
200 > 291.00
500 > 287.00

Brass material, apply to solar energy pump ,gas hot water heater, water control machine,intelligent water meter etc.

  • Water quality requirement: Drinking water health standards
  • Withstand hydraulic pressure: ≤1.75 MPa
  • Voltage/electric current: DC4.5 to 18V, ≤15mA, can be customized 24V
  • Insulation resistance: >100MΩ
  • Electrical strength: AC500V, 50HZ
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V
  • Pulse duty cycle: 50%
  • Flow characteristic: F=8.1Q-3, F:HZ, Q:L/min ±10%
  • Cumulative flow conversion: 1L water=477pulse, accuracy: 10%

Product Details:

Diameter 0.75 inch ( 3/4 inch)
Flow Range 2 to 45 L/min
Media Water
Model Name/Number SEN-HZ43WB
Brand SAIER
Operating Temperature 0 to 80 deg C
Voltage DC 4.5 to 18 V
Material Brass