ADIY A7670C 4G Breakout Board supports wireless communication modes of GSM/GPRS. It supports maximum 10Mbps downlink rate and 5Mbps uplink rate. The A7670 series supports multiple built-in network protocols, supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible with SIM7500/SIM7600 series modules. Meanwhile the A7670series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, I2C and GPIO.
The A7670 series is the LTE Cat 1 module which supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. The A7670 series adopts LGA form factor and is compatible with SIM7000/SIM7070 series(NB/Cat M modules), and SIM800A/SIM800F(2G modules), which enables smooth migration from 2G/NB/Cat M products to LTE Cat 1 products, and greatly facilitates more compatible product design for the customer needs. The A7670 series supports multiple built-in network protocols, supports drivers for main operation systems (USB driver for Windows, Linux and Android etc.) and software function, AT commands are compatible with SIM7500/SIM7600 series modules. Meanwhile the A7670series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, I2C, GPIO, which is suitable for main IOT applications such as telematics, surveillance devices, POS, industrial routers, and remote diagnostics etc.
Once you connect the SIMA7670C modem using the USB to RS232 TTL convertor or any other serial converter module, you need to find the correct COM port from the Device Manager of the USB to Serial Adapter.
Then you can open Putty or any other terminal software and open a connection to that COM port at 115200 baud rate, which is the default baud rate of this modem. Once a serial connection is open through the computer you can start sending the AT commands. When you send AT commands for example “AT” you should receive back a reply from the SIM800A modem saying “OK” or other response depending on the command sent.
Features:
1. Power supply VBAT: 3.4V ~4.2V(Recommended VBAT: 3.8V)
2. Power saving Current in sleep mode :<2.5mA
3. Data Transmission Throughput
a) GPRS multi-slot class 12
b) EDGE multi-slot class 12
c) LTE-FDD CAT1：10 Mbps (DL)，5 Mbps (UL)
d) LTE-TDD CAT1 ：8.96Mbps (DL)，3.1 Mbps (UL)
e) GSM/LTE Main antenna interface
4. SMS
a) MT,MO, CB, Text , PDU mode
b) Short Message(SMS) storage device: USIM Card, CB does not support saving in SIM Card Support CS domain and PS domain SMS
c) USIM interface Support identity card: 1.8V/ 3V
d) USIM application support SAT class 3, GSM 11.14 Release 98 Support USAT
e) Support phonebook types : SM/FD/ON/AP/SDN
f) Audio feature:
a. PCM Digital Audio interface
b. Analog audio MIC input interface(A7670C-LAAS support only)
c. Analog audio SPK output interface(LAAS support only)
